Description

This harness is a plug and play harness to add a 12v triggered source from the reverse signal on a Canam X3. There is no microswitch or anything to worry about breaking with this solution, it plugs in at the rear of your machine and just works. It comes with a short power cable, if you would like the extended power cable that is long enough to reach the center console power bus bar, please select yes for the option to include long power cable. A fuse is included with all purchases. The module can safely supply up to 20 amps of power to your accessories. This can be used for reverse lights, reverse cameras, or any other application where you want something to turn on when you shift into reverse. This module will only function when the machine is on (running or not). The module can be mounted at the rear of the machine or behind the seat. If you plan to mount behind the seat, please select that above when purchasing so we can include a longer signal cable for you.

Please check fitment tab above before placing order to ensure this is compatible with your machine

 

What is included?

For rear mounted modules

  • 1 ft lead wire to connect to battery (5.5ft if you choose longer cables in the options)
  • 1 ft lead wire for your triggered accessories like lights
  • 1 Module
  • 1 transmission sensor harness

 

For behind seat mounted modules

  • 1 ft lead wire to connect to battery
  • 1 ft lead wire for your triggered accessories like lights (5.5ft if you choose longer cables in the options)
  • 1 Module
  • 1 transmission sensor harness with a 5.5 ft cable to connect to the harness

 

Install instructions can be found here. Please contact me if you have any issues or questions.